Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 735

portCfgShow 2 portCfgShow Displays port configuration settings. SYNOPSIS portcfgshow portcfgshow [slot/]port portcfgshow -i [ndex1[-index2] [...] [-f]] portcfgshow -slot slot1[-slot2] [...] portcfgshow option [slot/][ge_port] [arguments] [optional_arguments] DESCRIPTION Use this command to display the current configuration of a port. The behavior of this command is platform-specific; output varies depending on port type and platform, and not all options are supported on all platforms. Non-GbE port displays When used without operands, this command displays port configuration settings for all ports on a switch, except Gigabit Ethernet (GbE) ports. Displays supported only on the Brocade 7800/FX8-24 Use this command with optional arguments to display the following parameters configured for a GbE port on the Brocade 7800/FX8-24 platforms. • IP interfaces on the GbE port • Static routes on the IP interfaces • Address resolution protocol (ARP) entries • VLAN tag configuration • Fibre Channel over IP (FCIP) tunnel configuration settings • IPSec configuration • Inband Management IP addresses and routes. Non-GbE port displays The following information is displayed when the command is issued for all ports, for a single port, or for one or more port ranges specified by their port index numbers or slot numbers: Area Number Displays the port area number. This field is displayed only when portCfgShow is executed for a single port. Octet Speed Combo Displays the speed configuration for a port octet. This value is set by the portCfgOctetSpeedCombo command. Port octet speed configuration is supported only on Condor 3-based platforms. On unsupported platforms the Octet Speed Combo field is suppressed. Valid Octet Combo values include the following: 1 Autonegotiated or fixed port speeds of 16 Gbps,8 Gbps,4 Gbps, and 2 Gbps. 2 Autonegotiated or fixed port speeds of 10 Gbps,8 Gbps,4 Gbps, and 2 Gbps. Fabric OS Command Reference 707 53-1002746-01