Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 350

2 fcrBcastConfig fcrBcastConfig Displays or sets the broadcast frame forwarding option. SYNOPSIS fcrbcastconfig --show fcrbcastconfig --enable -f fabric_id fcrbcastconfig --disable -f fabric_id fcrbcastconfig --help DESCRIPTION NOTES OPERANDS EXAMPLES Use this command to enable or disable the broadcast frame option or to display the current configuration. If no operands are specified, this command displays the usage. By default, frame forward option is disabled. Use the --show option to display the current settings on the switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: --show Shows the current broadcast configuration as enabled or disabled. If broadcast frame forwarding is disabled for selected FIDs, only the enabled FIDs in the current configuration are displayed. --enable Enables the frame forwarding option for a specified fabric ID. --disable Disables the frame forwarding option for a specified fabric ID -f fabric_id Specifies the fabric ID to be disabled or enabled. Valid values are 1 to 128. This operand is required with the --enable and --disable options. --help Displays the command usage. To display the current configuration: fcr:admin> fcrbcastconfig --show Broadcast configuration is disabled for all FID To enable broadcast frame forwarding for FID 33, 28, and 2: fcr:admin> fcrbcastconfig --enable -f 33 fcr:admin> fcrbcastconfig --enable -f 28 fcr:admin> fcrbcastconfig --enable -f 2 To display the new configuration: fcr:admin> fcrbcastconfig --show Broadcast configuration is enabled for FID: 2 33 128 To disable broadcast frame forwarding for FID 33: fcr:admin> fcrbcastconfig --disable -f 33 322 Fabric OS Command Reference 53-1002746-01