Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 214

2 cryptoCfg --set -keyvault Sets the key vault type. This command is valid only on the group leader. value Specifies the key vault type. The default is set to no value. This operand is required. Valid values for -keyvault include the following parameters: LKM Specifies the NetApp LKM appliance (trusted key vault). DPM Specifies the Data protection Manager key repository. SKM Specifies one of the following: the HP Secure Key Manager (SKM) or the HP Enterprise Secure Key Manager (ESKM). Both are opaque key repositories. TEKA Specifies the Thales e-Security keyAuthority (TEKA) key repository. TKLM Specifies the Tivoli Key Lifetime Manager (TKLM) key repository KMIP Specifies the Key Management Interoperability Protocol (KMIP) key repository. --set -failbackmode Sets the failback mode parameter. This parameter is set on the group leader. Valid values for failback mode include the following parameters: auto Enables automatic failback. In this mode, failback occurs automatically within an HA cluster when an encryption switch or blade that failed earlier has been restored or replaced. Automatic failback mode is enabled by default. manual Enables manual failback. In this mode, failback must be initiated manually after an encryption switch or blade that failed earlier has been restored or replaced. --set -hbmisses Sets the number of heartbeat misses allowed in a node that is part of an encryption group before the node is declared unreachable. This value is set in conjunction with the time-out value. It must be configured at the group leader node and is distributed to all member nodes in the encryption group. The following operand is required: value Specifies the number of heartbeat misses. The default value is 3. The range is 1 to 15 in integer increments only. --set -hbtimeout Sets the time-out value for the heartbeat. This parameter must be configured at the group leader node and is distributed to all member nodes in the encryption group. The following operand is required: value Specifies the heartbeat time-out in seconds. The default value is 2 seconds. Valid values are integers in the range between 1 and 30 seconds. 186 Fabric OS Command Reference 53-1002746-01