Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 666
FUNCTION, SYNOPSIS, DESCRIPTION, portcfg fcipcircuit
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 666 highlights
2 portCfg To create a VLAN tag entry for a failover crossport interface with a VLAN ID of 200 and an L2 CoS value of 1 and to display the configuration: switch:admin> portcfg vlantag 8/xge0 add 192.168.11.20 200 1 -x Operation Succeeded switch:admin> portshow vlantag 8/xge0 Port: 8/xge0 Interface Address VlanId L2CoS Flags Destination Address 192.168.11.20 200 1 Perm Net (crossport) 0.0.0.0 FUNCTION SYNOPSIS To delete a VLAN tag entry: switch:admin> portcfg vlantag ge2 delete 192.168.2.10 200 Operation Succeeded To delete a VLAN tag entry for a crossport: switch:admin> portcfg vlantag 8/xge0 delete 192.168.11.20 200 -x Operation Succeeded Configure tunnels, circuits, and management interfaces on the Brocade 7800/FX8-24 portcfg action [slot/]ve_port options arguments DESCRIPTION Use this command to configure FCIP tunnels and FCIP circuits on the GbE/10GbE ports on the Brocade 7800 and FX8-24 platforms only and to configure the inband management on these platforms. The FCIP tunnels on the local and remote GbE ports act as Virtual E_Ports (VE_Ports) connecting the local and remote fabrics. The following operations can be performed with this command: • portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels. - Configure a tunnel with the FCIP FastWrite feature. - Enable or disable Tape Pipelining. - Configure the compression options. - Configure an IPSec-enabled tunnel. - Configure VLAN tagging on the default FCIP circuit. - Configure Differentiated Services Code Point (DSCP) markings. - Set the committed rate or minimum and maximum rates for the default circuit. - Configure a tunnel for FICON emulation. • portcfg fcipcircuit - Create, modify, and delete additional FCIP circuits. - Set or modify the committed rate or minimum and maximum rates for the circuit. - Configure or change VLAN tagging on the default circuit. - Set or modify additional circuit parameters. • portcfg mgmtif - Configure the inband management interfaces. • portcfg mgmtroute - Configure the routes for the inband management interfaces. • portcfg autoneg - Enable or disable autonegotiation settings for 1GbE ports. 638 Fabric OS Command Reference 53-1002746-01