Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 970

2 setVerbose setVerbose Specifies module verbose level. SYNOPSIS setverbose [module_name][level] DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to set the verbose level of the specified module. These levels filter the display of the debug message to the serial console. By default, no debug messages are displayed. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command has the following operands: module_name Specify the name of the module for which the verbose level is to be set; module names are case-sensitive. level Specify the verbose level (0 to 9). To set the verbose level of a module named NS to value 3: switch:admin> setverbose NS 3 switch:admin> dbgshow NS Module NS, debug level = 0, verbose level = 3 dbgShow, setDbg 942 Fabric OS Command Reference 53-1002746-01