Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 871

portStatsClear 2 portStatsClear Clears port hardware statistics. SYNOPSIS portstatsclear [slot/]port portstatsclear -i [index1[-index2] [...] [-f]] portstatsclear -x [hex1[-hex2] [...]] portstatsclear -slot [slot1[-slot2][...] portstatsclear -h DESCRIPTION NOTES OPERANDS Use this command to clear the hardware statistics for the specified ports. Including ALPA-based CRC monitor, End-to-End monitor, and Filter-based performance monitor statistics. You can identify a single port to be cleared by its port number or by its port index number in decimal or hexadecimal format. Port ranges are supported with port numbers, index numbers(decimal or hexadecimal) or by specifying a slot or a slot range. Use switchShow for a listing of valid ports, slots, and port index numbers. Specifying multiple ports with the index (-i) or slot (-s) option is supported only if PortSwap is disabled. They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index argument to display the portSwap status, or alternately use portSwapShow. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is not supported on FCoE ports. This command has the following operands: slot For bladed systems only, specify the slot number of the port to be cleared, followed by a slash (/). port Clears a single port identified by the port number, relative to its slot on bladed systems. Port ranges are not supported with this command. Use switchShow for a listing of valid ports. -i index1[-index2] Clears a single port or a range of ports identified by port index numbers. You may specify multiple index ranges separated by a space, for example, -i 33-47 65-73. -f Ignores nonexisting ports. This operand is valid only with the -i option. -x [hex1 [-hex2]] Clears a port or a range of ports identified by port numbers, index number in hexadecimal format. You may specify multiple port ranges separated by a space, for example, -x 21-26 28-3c. -slot [slot1[-slot2] Clears all ports on a slot or on a range of slots, for example, -s 3-5. You may specify multiple slot ranges separated by a space, for example, -s 3-5 8-10. Fabric OS Command Reference 843 53-1002746-01