Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 138
cfgRemove
View all Dell Brocade 6520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
2 cfgRemove cfgRemove Removes a member from a zone configuration. SYNOPSIS cfgremove "cfgName","member[; member...]" DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to remove one or more members from an existing zone configuration. If all members are removed, the zone configuration is deleted. This command changes the Defined Configuration (see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The following operands are required: "cfgName" Specify a name for the zone configuration, enclosed in double quotation marks. "member" Specify a zone member or a list of zone members to be removed from the configuration. The list must be enclosed in double quotation marks. Members must be separated by semicolons. To remove a zone from a configuration: switch:admin> cfgremove "Test_cfg", "bluezone" cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgSave, cfgShow, cfgTransAbort, cfgTransShow 110 Fabric OS Command Reference 53-1002746-01