Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 981

slotShow 2 slotShow Displays the status of all slots in the system. SYNOPSIS slotshow [-m] [-p] DESCRIPTION Use this command to display the current status of each slot in the system. Depending on the option used, the command retrieves information on blade type, blade ID, status, Brocade model name, and power usage for each slot in the switch or chassis. This command does not display the model names for unsupported blades. If a blade is not supported, only the Blade ID is displayed, and the Status field registers as FAULTY(9). Use the list below to identify the model name associated with an unsupported blade. When no operand is specified, slotShow displays the blade type, blade ID, and status for each slot. In this view, the fields and their possible values are as follows: Slot Displays the physical slot number. Blade Type Displays the blade type as one of the following: SW BLADE The blade is a switch. CP BLADE The blade is a control processor. CORE BLADE The blade is a core switch blade. AP BLADE The blade is an application processor. UNKNOWN The blade not present or its type is not recognized. ID Displays the blade type ID as one of the following: 16 CP256 control processor blade 17 FC4-16 port blade 18 FC4-32 port blade 31 FC4-16IP port blade 33 FA4-18 port blade 36 FC4-48 port blade 37 FC8-16 switch blade 43 FS8-18 application processor blade Fabric OS Command Reference 953 53-1002746-01