Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 132

2 cfgClear cfgClear Clears all zone configurations. SYNOPSIS cfgclear DESCRIPTION NOTES OPERANDS EXAMPLES SEE ALSO Use this command to clear all zone information in the transaction buffer. All defined zone objects in the transaction buffer are deleted. If an attempt is made to commit the empty transaction buffer while a zone configuration is enabled, you are warned to first disable the enabled zone configuration or to provide a valid configuration with the same name. After clearing the transaction buffer with the cfgClear command, use the cfgDisable command to clear the entire zoning configuration (both the transaction buffer and the active configuration). If there is no current active zoning configuration, or you just want to clear the transaction buffer, use the cfgSave command to commit the transaction. If the default zone access mode is "No Access", this command recreates the default zoning objects. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. None To clear all zones and then clear nonvolatile memory: switch:admin> cfgclear The Clear All action will clear all Aliases, Zones, FA Zones and configurations in the Defined configuration. Run cfgSave to commit the transaction or cfgTransAbort to cancel the transaction. Do you really want to clear all configurations? \ (yes, y, no, n): [no] n switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Until the Effective configuration is re-enabled, merging new switches into the fabric is not recommended and may cause unpredictable results with the potential of mismatched Effective Zoning configurations. Do you want to save Defined zoning configuration only? \ (yes, y, no, n): [no]n cfgDisable, cfgEnable, cfgSave 104 Fabric OS Command Reference 53-1002746-01