Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 141

cfgShow 2 cfgShow Displays zone configuration information. SYNOPSIS cfgshow ["pattern"] [, mode] cfgshow [--transdiffs] cfgshow [--transdiffsonly] cfgshow --help DESCRIPTION NOTES OPERANDS Use this command to display zone configuration information. If no operand is specified, all zone configuration information (both defined and effective) is displayed. If the local switch has an outstanding transaction, this command displays the most recently edited zone configuration that has not yet been saved. If the local switch has no outstanding transaction, this command displays the committed zone configuration. If a pattern is specified, only matching configurations are displayed. • The defined configuration is the complete set of all zone objects that have been defined in the fabric. There can be multiple zone configurations defined, but only one can be enabled at a time. There might be inconsistencies in the definitions, zones, or aliases that are referenced but not defined, or there might be duplicate members. The defined configuration is the current state of the administrator input. • The effective configuration is the single zone configuration that is currently enabled. The devices that an initiator sees in the fabric are based on this configuration. The effective configuration is built when a specific zone configuration is enabled and all error checking has been completed successfully. Use the --transdiffs and --transdiffsonly options to view changes in the current transaction. The command output displays changes in the current transaction by the following notations: • An asterisk(*) before any tag indicates a change in that zone, zone configuration, alias or any other entity in the zone configuration. • A plus(+) before any entity indicates that it is a newly added entity. • A minus(-) before any entity indicates that it is a deleted entity. When this command is executed after a zoning transaction was aborted on the local switch, it displays the following warning message: "Warning: Current Zoning Transaction was aborted. Reason code = Zone Config update received." When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. The following operands are optional: "pattern" A regular expression that matches zone configuration names. The pattern must be enclosed in quotation marks and can contain the following: Question mark (?) Matches any single character Fabric OS Command Reference 113 53-1002746-01