Dell Brocade 6520 Command Reference Supporting Fabric OS v7.1.0 - Page 1044

2 switchShow OPERANDS EXAMPLES This command has the following operands: -slot slot Displays blade information. You can specify this operand with -portname, but not with any other operand. -portname Displays the name for each port on the switch. The port name is set by the portName command. You can specify this operand with -slot, but not with any other operand. -portcount Displays the number of ports on the switch. This operand is exclusive. -iscsi Displays the number of ports on the iSCSI sessions associated with GbE ports in a switch. This operand is exclusive. (Deprecated) -qsfp Displays the output of the switchShow command with a QSFP column added. If a QSFP is installed on the port, the QSFP number is displayed for the port. This number corresponds to the physical QSFP number that can be found on the front of each Core Blade. A double dash (--) indicates that no QSFP is present. To display the port count: switch:admin> switchshow -portcount FC ports = 198, GE ports = 12 To display GbE ports with iSCSI sessions: switch:admin> switchshow -iscsi Ports of Slot 1 ge0 ge1 ge2 ge3 ge4 ge5 ge6 ge7 Sessions 0 0 0 0 0 0 0 0 To display a QoS-capable Core Access Gateway with online AoQ F_Ports and N_Ports: switch:admin> switchshow switchName: Spirit_125 switchType: 66.1 switchState: Online switchMode: Access Gateway Mode switchWwn: 10:00:00:05:1e:85:95:d0 switchBeacon: OFF FC Router: OFF FC Router BB Fabric ID: 1 Area Port Media Speed State Proto 0 0 -- N8 No_Module FC 1 1 -- N8 No_Module FC 2 2 -- N8 No_Module FC 3 3 -- N8 No_Module FC 4 4 -- N8 No_Module FC 5 5 -- N8 No_Module FC 6 6 -- N8 No_Module FC 7 7 -- N8 No_Module FC 8 8 -- N8 No_Module FC 9 9 id N8 Online FC F-Port \ 10:00:00:05:1e:53:2c:54 0x690105 (AoQ) 10 10 id N8 Online FC F-Port \ 1016 Fabric OS Command Reference 53-1002746-01