VMware 4817V62 Administration Guide - Page 144
Change the Floppy Drive Configuration, Use ISO Image, Browse, Hardware, Connect at power
View all VMware 4817V62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
vSphere Basic System Administration 5 Select whether to use a client device, host device, or ISO file. Option Client Device Host Device Datastore ISO File Description Select this option to connect the DVD/CD-ROM device to a physical DVD or CD-ROM device on the system running the vSphere Client. To connect the device, you must click the Connect CD/DVD button in the toolbar when you power on the virtual machine. a Select this option to connect the DVD/CD-ROM device to a physical DVD or CD-ROM device on the host. b Select the specific device from the drop-down list. a Select this option to connect the DVD/CD-ROM device to an ISO file stored on a datastore accessible to the host. b Click Browse and select the ISO file. 6 For client devices, select the mode used for the connection. n Use Pass-through (raw) mode only for remote client device access. n Use ATAPI emulation to access a host CD-ROM device. The host CD-ROM device is accessed through emulation mode. Pass-through mode is not functional for local host CD-ROM access. You can write or burn a remote CD only through pass-through mode access, but in emulation mode you can only read a CD-ROM from a host CD-ROM device. 7 Alternatively, select Use ISO Image to connect the virtual machine's drive to an ISO image file. 8 If you selected Use ISO Image, click Browse to navigate to the file. 9 Under Virtual device node, use the drop-down menu to select the device node the drive uses in the virtual machine. 10 Click OK to save your changes and close the dialog box. Change the Floppy Drive Configuration Use the Hardware tab in the Virtual Machine Properties dialog box to configure a floppy drive for a virtual machine. Procedure 1 In the Virtual Machine Properties Editor, click the Hardware tab. 2 Click the floppy drive in the Hardware list. 3 Under Device Status, select Connect at power on to connect this virtual machine to the floppy drive when the virtual machine is powered on. 4 Select the device type to use for this virtual device. Option Client Device Host Device Description Select this option to connect the floppy device to a physical floppy device on the system running the vSphere Client. To connect the device, you must click the Connect Floppy button in the toolbar when you power on the virtual machine. a Select this option to connect the floppy device to a physical floppy device on the host. b Select the specific device from the drop-down list. 144 VMware, Inc.