Netgear XCM8810 Chassis Hardware Installation Guide - Page 100
disable snmp traps, disable snmpv3
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines This command allows the administrator to disable an snmp community. It sets the rowStatus of the community to NotInService. When disabled, SNMP access to the switch using the designated community is not allowed. Example The following command disables the community string named netgear: disable snmp community netgear disable snmp traps disable snmp traps Description Prevents SNMP traps from being sent from the switch. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines This command does not clear the SNMP trap receivers that have been configured. The command prevents SNMP traps from being sent from the switch even if trap receivers are configured. To view if SNMP traps are being sent from the switch, use the show management command. The show management command displays information about the switch including the enabled/disabled state of SNMP traps being sent. Example The following command prevents SNMP traps from being sent from the switch to the trap receivers: disable snmp traps disable snmpv3 disable snmpv3 [default-group | default-user] Description Selectively disables SNMPv3 default-group or default-user access on the switch. 100 | Chapter 3. Commands for Managing the Switch