Netgear XCM8810 Chassis Hardware Installation Guide - Page 1158

NETGEAR 8800 Chassis Switch CLI Manual suppressed-routes transmitted-routes detail all no-advertise no-export no-export-subconfed community_num AS_Num Num any netMaskLen networkPrefixFilter exact Specifies that only suppressed routes should be displayed (for route flap dampening enabled routes). Specifies that only transmitted routes should be displayed. Specifies to display the information in detailed format. Specifies all routes. Specifies the no-advertise community attribute. Specifies the no-export community attribute. Specifies the no-export-subconfed community attribute. Specifies a community number. Specifies an autonomous system ID (0-65535). Specifies the BGP community number. Specifies all routes with a given or larger mask length. Specifies a subnet mask length (number of bits). Specifies an IP address and netmask. Specifies an exact match with the IP address and subnet mask. Default If no address family is specified, IPv4 unicast is the default. Usage Guidelines Use this command to display information about a specific BGP neighbor routes. The option network any / displays all BGP routes whose mask length is equal to or greater than , irrespective of their network address. The option network any / exact displays all BGP routes whose mask length is exactly equal to , irrespective of their network address. Example The following command displays information about a specified neighbor's received routes: show bgp neighbor 10.10.10.10 received-routes all show bgp peer-group show bgp peer-group {detail | {detail}} Description Displays the peer groups configured in the system. 1158 | Chapter 25. BGP Commands