Netgear XCM8810 Chassis Hardware Installation Guide - Page 316
show inline-power
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default N/A. Usage Guidelines This command power cycles the specified ports. Ports are immediately disabled and then re-enabled, allowing remote PDs to be power-cycled. This command affects only inline power; it does not affect network connectivity for the port(s). Example The following command resets power for port 4 on slot 3 on the switch: reset inline-power ports 3:4 show inline-power show inline-power Description Displays inline power status information for the specified PoE switch. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines The output varies depending on the PoE device you are using. • Inline power status-The status of inline power. The status conditions are: • Enabled • Disabled • Power usage threshold • Disconnect precedence • Firmware status-The operational status of the slot. The status conditions are: • Operational • Not operational • Disabled • Subsystem failure • Measured power-The amount of power, in watts, that currently being used by the switch. 316 | Chapter 7. PoE Commands