Netgear XCM8810 Chassis Hardware Installation Guide - Page 1088

NETGEAR 8800 Chassis Switch CLI Manual Description Configures the metric to be included in the Multi-Exit-Discriminator (MED) path attribute. The MED path attribute is included in route updates sent to external peers if a value is configured. Syntax Description none bgp_med Specifies not to use a multi-exist-discriminator number. Specifies a multi-exist-discriminator number. The range is 0-2147483647. Default N/A. Usage Guidelines BGP selects routes based on the following precedence (from highest to lowest): • higher weight • higher local preference • shortest length (shortest AS path) • lowest origin code • lowest MED • route from external peer • lowest cost to Next Hop • lowest routerID Example The following command configures the metric to be included in the MED path attribute: configure bgp med 3 configure bgp neighbor allowas-in configure bgp neighbor [all | ] {address-family [ipv4-unicast | ipv4-multicast]} allowas-in {max-as-occurrence } Description Configures BGP to receive and accept a looped BGP route from the specified neighbor, provided the number of occurrences of local AS number in AS-Path is less than or equal to the value of as-count. 1088 | Chapter 25. BGP Commands