Netgear XCM8810 Chassis Hardware Installation Guide - Page 1275
con pim border
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1275 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Configures the MSDP router to send SA request messages to the MSDP peer when a new member becomes active in a group. Syntax Description remoteaddr vrname Specifies the IP address of the MSDP peer from which the local router requests SA messages when a new member becomes active in a group, and MSDP has no cache entry for the group in the local database. Specifies the name of the virtual router on which the MSDP cache server is configured. If a virtual router name is not specified, it is extracted from the current CLI context. Default By default, the router does not send SA request messages to its MSDP peers when a new member joins a group and wants to receive multicast traffic. The new member simply waits to receive SA messages, which eventually arrive. Usage Guidelines You can use this command to force a new member of a group to learn the current active multicast sources in a connected PIM-SM domain that are sending to a group. The router will send SA request messages to the specified MSDP peer when a new member joins a group and MSDP doesn't have a cache entry for that group in the local database. The peer replies with the information in an SA cache response message. Note: An MSDP peer must exist before it can be configured as an SA cache server. The configure msdp sa-cache-server command accepts the value for only if it is an existing peer's IP address. Example The following command configures an MSDP cache server: configure msdp sa-cache-server 172.19.34.5 configure pim border configure pim border Description Configures a PIM VLAN as a border VLAN, which is used to demarcate a PIM domain when using MSDP. Chapter 28. MSDP Commands | 1275