Netgear XCM8810 Chassis Hardware Installation Guide - Page 517

NETGEAR 8800 Chassis Switch CLI Manual Description Displays the number of ACL slices and rules consumed by the ACLs on the slices that support a particular port. Syntax Description port Specifies to display the usage for the slices that support this port. Default N/A. Usage Guidelines Use this command to display how many slices and how many rules per each slice are currently consumed by the ACLs on the slices that support a particular port. This command also displays which ports share the same slices as the specified port. The slice support for the NETGEAR 8800 series modules that use this mechanism is as follows: • 8800 modules- • XCM888F- • Its 8 ports have 4 slices with each slice having enough memory for 128 egress rules. • Its 8 ports have 16 slices with each slice having enough memory for 256 ingress rules. • XCM8848T/XCM8824F- • Each group of 24 ports has 4 slices with each slice having enough memory for 128 egress rules. • Each group of 24 ports has 16 slices with each slice having enough memory for 256 ingress rules. Example The following example displays the ACL slice usage on port 8:1: show access-list usage acl-slice port 8:1 The output of this command is similar to the following: Ports 8:1-8:12, 8:25-8:36 Slices: Used: 3 Available: 5 Slice 5 Rules: Used: 9 Available: 119 Slice 6 Rules: Used: 1 Available: 127 Slice 7 Rules: Used: 24 Available: 104 The following example displays the ACL ingress and egress slice usage on port 5:1: Chapter 13. ACL Commands | 517