Netgear XCM8810 Chassis Hardware Installation Guide - Page 287
con lldp transmit-delay, This is the timer between triggered updates.
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default 5 seconds. Usage Guidelines This is a global timer. If one port sends a notification, no notifications for other ports go out for the configured interval. Example The following command configures an interval of 60 seconds for LLDP SNMP notifications: configure lldp snmp-notification-interval 60 configure lldp transmit-delay configure lldp transmit-delay [ auto | ] Description Configures the delay time between successive frame transmissions initiated by a value change or status change in any of the LLDP local systems Management Information Base (MIB). The auto option uses a formula (0.25 * transmit-interval) to calculate the number of seconds. Syntax Description auto seconds Uses the formula (0.25 * transmit-interval) to calculate the seconds. Specifies the interval at which LLDP notifications are sent. The range is 1 to 8291. Default 2 seconds. Usage Guidelines This is the timer between triggered updates. Example The following command configures the delay between LLDP frame transmissions for triggered updates to be automatically calculated: configure lldp transmit-delay auto configure lldp transmit-hold configure lldp transmit-hold Chapter 6. Commands for Configuring LLDP | 287