Netgear XCM8810 Chassis Hardware Installation Guide - Page 864
enable icmp timestamp, enable icmp unreachables
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 864 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Enables the generation of an ICMP time exceeded message (type 11) when the TTL field expires during forwarding. IP multicast packets do not trigger ICMP time exceeded messages. If a VLAN is not specified, the command applies to all IP interfaces. This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands. Example The following command enables the generation of ICMP time exceeded messages on VLAN accounting: enable icmp time-exceeded vlan accounting enable icmp timestamp enable icmp timestamp {vlan } Description Enables the generation of an ICMP timestamp response on one or all VLANs. Syntax Description name Specifies a VLAN name. Default Enabled. Usage Guidelines Enables the generation of an ICMP timestamp response (type 14, code 0) when an ICMP timestamp request is received. If a VLAN is not specified, the command applies to all IP interfaces. This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands. Example The following command enables the generation of an ICMP timestamp response on VLAN accounting: enable icmp timestamp vlan accounting enable icmp unreachables enable icmp unreachables {vlan } 864 | Chapter 19. IP Unicast Commands