Netgear XCM8810 Chassis Hardware Installation Guide - Page 255
Ashow ports packet, Port number
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
NETGEAR 8800 Chassis Switch CLI Manual Software redundant port: autopolarity: Disabled Enabled show ports packet show ports {mgmt | } packet {no-refresh} Description Displays a snapshot or real-time histogram of packet statistics. Syntax Description mgmt port_list no-refresh Specifies the management port. Specifies one or more ports or slots and ports. Specifies a static snapshot of data. Default Real-time statistics. Usage Guidelines If you do not specify a port number or range of ports, the system displays information for all ports; if you specify the no-refresh parameter, the system displays a snapshot of the data at the time you issue the command. To clear the counters, use the clear counters ports command. This status information may be useful for your technical support representative if you have a network problem. The following packet statistics are displayed: • Port number • Link state • Packet size Example The following command displays packet statistics for slot 1, port 1, slot 2, port 1, and slot 5, ports 1 through 8: show ports 1:1, 2:1, 5:1-5:8 packet Following is sample output from this command: Port Link Packet Sizes State 0-64 65-127 128-255 256-511 512-1023 1024-1518 Jumbo 1:1 A 0 0 0 0 0 0 0 Chapter 5. Commands for Configuring Slots and Ports on a Switch | 255