Netgear XCM8810 Chassis Hardware Installation Guide - Page 299

NETGEAR 8800 Chassis Switch CLI Manual Last table change time : Fri Dec 17 10:42:33 2004 Number of Table Inserts : 3 Number of Table Deletes : 0 Number of Table Drops : 0 Number of Table Age Outs : 0 Port Tx Tx Length Rx Rx Rx TLVs TLVs Total Exceeded Total Discarded Errors Discarded Unrecogn. 1:1 189 0 5654 0 0 0 0 2:2 188 0 565 0 0 0 0 unconfigure lldp unconfigure lldp {ports [all | ]} Description Leaves LLDP enabled and configured; restores the LLDP timer default values. Syntax Description all port_list Specifies all ports on the switch. Specifies one or more ports or slots and ports. Default N/A. Usage Guidelines When you issue the global unconfigure lldp, only the LLDP timers are reset to default values. All the configured TLVs remain on the ports remain, and LLDP remains enabled. When you use the keyword ports, the TLVs for each port are returned to the five default TLVs. LLDP remains enabled. Example The following command restores LLDP factory default TLVs for ports 1:4 to 1:8: unconfigure lldp ports 1:4 - 1:8 Chapter 6. Commands for Configuring LLDP | 299