Netgear XCM8810 Chassis Hardware Installation Guide - Page 927
disable ipforwarding ipv6, disable iproute ipv6 sharing
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 927 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following command deletes the tunnel link39: delete tunnel link39 disable ipforwarding ipv6 disable ipforwarding ipv6 {vlan | tunnel | vr } Description Disables routing for one or all interfaces. If no argument is provided, disables routing for all interfaces on the current virtual router. Syntax Description vlan_name tunnel_name vr_name Specifies an IPv6 configured VLAN. Specifies an IPv6 tunnel. Specifies a virtual router. Default Disabled. Usage Guidelines When new IPv6 interfaces are added, IP forwarding is disabled by default. NETGEAR switches have a single hardware control per VLAN for IP forwarding of IPv4 and IPv6 unicast packets. Therefore, enabling IPv6 forwarding on a VLAN also enables IPv4 hardware forwarding on that VLAN. Example The following command disables forwarding of IPv6 traffic for a VLAN named accounting: disable ipforwarding ipv6 vlan accounting disable iproute ipv6 sharing disable iproute ipv6 sharing Description Disables IPv6 route sharing. Syntax Description This command has no arguments or variables. Chapter 20. IPv6 Unicast Commands | 927