Netgear XCM8810 Chassis Hardware Installation Guide - Page 74
con snmpv3 add group user
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Associates a filter profile with a parameter name. Syntax Description hex_profile_name profile_name hex_param_name param_name volatile Specifies the filter profile name. The value is to be supplied as a colon separated string of hex octets. Specifies the filter profile name in ASCII format. Specifies a parameter name to associate with the filter profile. The value to follow is to be supplies as a colon separated string of hex octets. Specifies a parameter name to associate with the filter profile in ASCII format. Specifies volatile storage. Default The default storage type is non-volatile. Usage Guidelines Use this command to add an entry to the snmpNotifyFilterProfileTable. This table associates a filter profile with a parameter name. The parameter name is associated with target addresses, and the filter profile is associated with a series of filters, so, in effect, you are associating a series of filters with a target address. Example The following command associates the filter profile prof1 with the parameter name P1: configure snmpv3 add filter-profile prof1 param P1 configure snmpv3 add group user configure snmpv3 add group [[hex ] | ] user [[hex ] | ] {sec-model [snmpv1| snmpv2c | usm]} {volatile} Description Adds a user name (security name) to a group. Syntax Description hex_group_name group_name Specifies the group name to add or modify. The value is to be supplied as a colon separated string of hex octets. Specifies the group name to add or modify in ASCII format. 74 | Chapter 3. Commands for Managing the Switch