Netgear XCM8810 Chassis Hardware Installation Guide - Page 1277

NETGEAR 8800 Chassis Switch CLI Manual A mesh group name must begin with an alphabetical character and may contain alphanumeric characters and underscores (_), but it cannot contain spaces. The maximum allowed length for a name is 32 characters. For name creation guidelines and a list of reserved names, see the section "Object Names" in the NETGEAR 8800 User Manual. Example The following command creates a mesh-group called "verizon": create msdp mesh-group verizon create msdp peer create msdp peer {remote-as } {vr } Description Creates an MSDP peer. Syntax Description remoteaddr remote-AS vrname Specifies the IP address of the MSDP router to configure as an MSDP peer. Specifies the autonomous system (AS) number of the MSDP peer. This optional parameter is deprecated, though the option is still available in the CLI for backward compatibility. The software ignores this parameter. Specifies the name of the virtual router to which this command applies. If a name is not specified, it is extracted from the current CLI context. Default N/A. Usage Guidelines The BGP route database is used by MSDP to determine the AS number for the peer. You can display the AS number (which can be a 2-byte for 4-byte AS number) using the command: show msdp [peer {detail} | {peer} ] {vr }. Example The following command creates an MSDP peer: create msdp peer 192.168.45.43 remote-as 65001 delete msdp mesh-group delete msdp mesh-group {vr } Chapter 28. MSDP Commands | 1277