Netgear XCM8810 Chassis Hardware Installation Guide - Page 639
enable web http, If HTTP access has been disabled
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 639 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines When enabled, each command is transmitted to the remote TACACS+ server for authorization before the command is executed. TACACS+ authentication must also be enabled to use TACACS+ authorization. Use the following command to enable authentication: enable tacacs Example The following command enables TACACS+ command authorization for the switch: enable tacacs-authorization enable web http enable web http Description Enables hypertext transfer protocol (HTTP) access to the switch on the default HTTP port (80). Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines If HTTP access has been disabled, use this command to enable HTTP access to the switch. Example The following command enables HTTP on the default port: enable web http enable web https enable web https Description Enables secure socket layer (SSL) access to the switch on the default port (443). Syntax Description This command has no arguments or variables. Chapter 15. Security Commands | 639