Netgear XCM8810 Chassis Hardware Installation Guide - Page 1034
uncon ospf, Interface
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1034 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Displays virtual link information about a particular router or all routers. Syntax Description router-identifier area-identifier Specifies a router interface number. Specifies an OSPF area. Default N/A. Usage Guidelines The area-identifier refer to the transit area used for connecting the two end-points. The transit area cannot have an area identifier of 0.0.0.0 and cannot be a stub or NSSA area. Example The following command displays virtual link information about a particular router: show ospf virtual-link 1.2.3.4 10.1.6.1 unconfigure ospf unconfigure ospf {vlan | area } Description Resets one or all OSPF interfaces to the default settings. Syntax Description vlan-name area-identifier Specifies a VLAN name. Specifies an OSPF area. Default N/A. Usage Guidelines The NETGEAR 8800 OSPF allows you to change certain configurable OSPF parameters on the fly. This command selectively resets the configurable parameters to their default values. Following is the list of parameters whose values will be reset to their defaults: Interface 1034 | Chapter 23. OSPF Commands