Netgear XCM8810 Chassis Hardware Installation Guide - Page 216
con slot restart-limit, disable flow-control rx-pause ports
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure slot restart-limit configure slot restart-limit Description Configures the number of times a slot can be restarted on a failure before it is shut down. Syntax Description slot-number num_restarts Specifies the slot number Specifies the number of times the slot can be restarted. The range is from 0 to 10,000. Default The default is 5. Usage Guidelines This command allows you to configure the number of times a slot can be restarted on a failure before it is shut down. If the number of failures exceeds the restart-limit, the module goes into a "Failed" state. If that occurs, use the disable slot and enable slot commands to restart the module. Example The following command configures slot 2 on the switch to be restarted up to 3 times upon a failure: configure slot 2 restart-limit 3 disable flow-control rx-pause ports disable flow-control rx-pause ports [ | all] Description Disables the processing of received pause flow control messages. Syntax Description port_list Specifies one or more ports or slots and ports. Default Enabled 216 | Chapter 5. Commands for Configuring Slots and Ports on a Switch