Netgear XCM8810 Chassis Hardware Installation Guide - Page 999
con ospf area add range
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 999 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description area-identifier policy-map none Specifies the OSPF target area. Specifies a policy. Specifies not to apply an interarea filter. Default N/A. Usage Guidelines For switches configured to support multiple OSPF areas (an ABR function), a policy can be applied to an OSPF area that filters a set of OSPF inter-area routes from being sourced from any other areas. Example The following command configures an inter-area filter policy, nosales: configure ospf area 0.0.0.6 interarea-filter nosales configure ospf area add range configure ospf area add range [ | ] [advertise | noadvert] [type-3 | type-7] Description Configures a range of IP addresses in an OSPF area to be aggregated. Syntax Description area-identifier ip-address ip-mask ipNetmask advertise noadvertise type-3 type-7 Specifies an OSPF area. Specifies an IP address Specifies a subnet mask. Specifies IP address / Netmask. Specifies to advertise the aggregated range of IP addresses. Specifies not to advertise the aggregated range of IP addresses. Specifies type 3 LSA, summary LSA. Specifies type 7 LSA, NSSA external LSA. Chapter 23. OSPF Commands | 999