Netgear XCM8810 Chassis Hardware Installation Guide - Page 1302
disable dot1p examination ports
![]() |
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1302 highlights
NETGEAR 8800 Chassis Switch CLI Manual delete vman accounting disable dot1p examination ports disable dot1p examination ports [all | ] Description Used with vMANs, this command instructs the switch to examine the 802.1p value of the inner tag header of the original packet to determine the correct egress queue on the egress port. Syntax Description all port_list Specifies all ports. Specifies a list of ports or slots and ports. Default Disabled. Usage Guidelines Use this command to instruct the system to refer to the 802.1p value contained in the inner tag header of the original packet when assigning the packet to an egress queue at the egress port of the vMAN. Example The following command uses the 802.1p value on the inner tag header of the original packet to put the packet in the egress queue on the vMAN egress port: disable dot1p examination port 3:2 enable dot1p examination port enable dot1p examination port [all | ] Description Used with vMANs, and instructs the switch to examine the 802.1p value of the inner tag, or header of the original packet, to determine the correct egress queue on the egress port. Syntax Description all port_list Specifies all ports. Specifies a list of ports or slots and ports. 1302 | Chapter 29. vMAN (PBN) Commands
![](/manual_guide/products/netgear-xcm8806-chassis-hardware-installation-guide-da290e3/1302.png)