Netgear XCM8810 Chassis Hardware Installation Guide - Page 1205
disable pim ssm vlan
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1205 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description name Specifies a VLAN. Default Disabled. Usage Guidelines None. Example The following command disables PIM snooping for all VLANs on the switch: disable pim snooping disable pim ssm vlan disable pim ssm vlan [ | all] Description Disables PIM SSM on a router interface. Syntax Description vlan_name all Specifies a VLAN name. Specifies all VLANs. Default Disabled on all interfaces. Usage Guidelines This command disables PIM-SSM on the specified Layer 3 VLAN. IGMPv3 include messages for multicast addresses in the SSM range is only processed by PIM if PIM-SSM is enabled on the interface. Any non-IGMPv3 messages in the SSM range are not processed by PIM on any switch interface, whether SSM is enabled or not. Example The following command disables PIM-SSM multicast routing on VLAN accounting: disable pim ssm vlan accounting Chapter 26. IP Multicast Commands | 1205