Netgear XCM8810 Chassis Hardware Installation Guide - Page 635
enable radius-accounting
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 635 highlights
NETGEAR 8800 Chassis Switch CLI Manual enable radius-accounting enable radius-accounting {mgmt-access | netlogin} Description Enables RADIUS accounting. Syntax Description mgmt-access netlogin Specifies the switch management RADIUS accounting server. Specifies the network login RADIUS accounting server. Default RADIUS accounting is disabled for both switch management and network login by default. Usage Guidelines The RADIUS client must also be enabled. Before you enable RADIUS accounting on the switch, you must configure the servers used for accounting and configure the authentication string (shared secret) used to communicate with the RADIUS accounting server. To configure the RADIUS accounting servers, use the following command: configure radius-accounting {mgmt-access | netlogin} [primary | secondary] server [ | ] {} client-ip [] {vr } To configure the shared secret, use the following command: configure radius-accounting {mgmt-access | netlogin} [primary | secondary] shared-secret {encrypted} If you do not specify a keyword, RADIUS accounting is enabled on the switch for both management and network login. Use the mgmt-access keyword to enable RADIUS accounting for switch management functions. Use the netlogin keyword to enable RADIUS accounting for network login. Example The following command enables RADIUS accounting on the switch for both management and network login: enable radius-accounting The following command enables RADIUS accounting for network login: enable radius-accounting netlogin Chapter 15. Security Commands | 635