Netgear XCM8810 Chassis Hardware Installation Guide - Page 413
show temperature, The output from this command is similar to the following
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default N/A. Usage Guidelines This command displays sFlow statistics for your system. The following fields are displayed: • Received frames-Number of frames received on sFlow enabled ports • Sampled Frames-Number of packets that have been sampled by sFlow • Transmitted Frames-Number of UDP packets sent to remote collector(s) • Broadcast Frames-Number of broadcast frames received on sFlow enabled ports • Multicast Frames-Number of multicast frames received on sFlow enabled ports • Packet Drops-Number of samples dropped Example To display sFlow statistics for your system, use the following command: show sflow statistics The output from this command is similar to the following: SFLOW Statistics Received frames Sampled Frames Transmitted Frames Broadcast Frames Multicast Frames Packet Drops : 1159044921 : 104944 : 10518 : 0 : 1055652 : 0 show temperature show temperature Description Depending on the platform, this command displays the current temperature of the I/O modules, management modules, power supply controllers, XGM-2xn card, and the switch. On a stack, the command displays the current temperature of the modules in each slot. Syntax Description This command has no arguments or variables Default N/A. Chapter 8. Commands for Status Monitoring and Statistics | 413