Netgear XCM8810 Chassis Hardware Installation Guide - Page 854
disable ip-option loose-source-route, option enabled are dropped by the switch.
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 854 highlights
NETGEAR 8800 Chassis Switch CLI Manual Other IP related configuration is not affected. Example The following command disables forwarding of IP broadcast traffic for a VLAN named accounting: disable ipforwarding broadcast vlan accounting disable ip-option loose-source-route disable ip-option loose-source-route Description Disables processing of the loose source route IP option in the IPv4 packet header. Syntax Description This command has no arguments or variables. Default Enabled. Usage Guidelines Disables the switch from forwarding IP packets with the IP option for loose source routing turned on. Packets with the loose-source-route option enabled are dropped by the switch. Example The following command disables processing of the loose source route IP option: disable ip-option loose-source-route disable ip-option record-route disable ip-option record-route Description Disables processing of the record route IP option in the IPv4 packet header. Syntax Description This command has no arguments or variables. Default Enabled. 854 | Chapter 19. IP Unicast Commands