Netgear XCM8810 Chassis Hardware Installation Guide - Page 667

NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines None. Example The following command displays the configuration of the DHCP server for the VLAN test: show vlan test dhcp-config The following is sample output from this command: DHCP Address Range Netlogin Lease Timer DHCP Lease Timer Primary DNS Server Secondary DNS Server Ports DHCP Enabled : 10.10.10.100->10.10.10.200 : Not configured (Default = 10 seconds) : Not configured (Default = 7200 seconds) : 1.1.1.1 : 2.2.2.2 : 23 show vlan security show vlan security Description Displays the MAC limit-learning and lock-learning information for the specified VLAN. Syntax Description vlan_name Specifies a VLAN name. Default N/A. Usage Guidelines The switch displays the following information: • Port-Indicates the port on which the MAC address has been learned • Limit-Indicates that there is either a limited or unlimited amount of learned entries • State-Indicates that the current FDB entries for the port are permanent, no additional entries are learned, or that the port allows unlimited, dynamic learning • Learned-Specifies the number of learned entries • Blackholed-Specifies the number of blackholed entries • Locked-Specifies the number of locked entries Example The following command displays the security setting of the DHCP server for the VLAN corp: Chapter 15. Security Commands | 667