Netgear XCM8810 Chassis Hardware Installation Guide - Page 456
create fdb mac-tracking entry, create fdbentry vlan ports
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 456 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following command enables MAC address tracking for all MAC addresses on port 2:1: configure fdb mac-tracking add ports 2:1 create fdb mac-tracking entry create fdb mac-tracking entry Description Adds a MAC address to the MAC address tracking table. Syntax Description mac_addr Specifies a device MAC address, using colon-separated bytes. Default The MAC address tracking table is empty. Usage Guidelines None. Example The following command adds a MAC address to the MAC address tracking table: create fdb mac-tracking entry 00:E0:2B:12:34:56 create fdbentry vlan ports create fdbentry vlan [ports | blackhole] Description Creates a permanent static FDB entry. Syntax Description mac_addr vlan_name port_list interface-list Specifies a device MAC address, using colon-separated bytes. Specifies a VLAN name associated with a MAC address. Specifies one or more ports or slots and ports associated with the MAC address. Specifies one or more interfaces to associate with the MAC address. 456 | Chapter 10. FDB Commands