Netgear XCM8810 Chassis Hardware Installation Guide - Page 239
Partner MAC
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
NETGEAR 8800 Chassis Switch CLI Manual Description Displays LACP, or dynamic link aggregation, settings for the specified LAG. Syntax Description group-id detail Specifies the LAG group ID you want to display. This is the number of the port you configured as the logical port of the LAG. Show detailed information. Default N/A. Usage Guidelines This command displays the following information about the specified LACP LAG: • LAG • Identifies the particular LAG. This number comes from logical port assigned to the LAG and is the LAG group ID. • Actor Sys-Pri • Shows the system priority for that LAG. • If this number is lower than the number displayed for the Partner Sys-Pri, the system you are working on is the controlling partner in the LAG. • Actor Key • Automatically generated LACP key. • Partner MAC • Identifies the MAC address for the system connecting to the LAG on the remote end. • Partner Sys-Pri • Shows the system priority for that LAG on the remote end. • If this number is lower than the number displayed for the Actor Sys-Pri, the system at the remote end is the controlling partner in the LAG. • Partner Key • LACP key automatically generated by the system to which this aggregator is connected. • If this number is lower than the number displayed for the Actor Key, the partner system is the controlling partner in the LAG. • Agg Count • Identifies the number of ports added to the aggregator for that LAG. • Member port • Port priority Chapter 5. Commands for Configuring Slots and Ports on a Switch | 239