Netgear XCM8810 Chassis Hardware Installation Guide - Page 988
enable ripng splithorizon, enable ripng triggerupdates
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 988 highlights
NETGEAR 8800 Chassis Switch CLI Manual The following command enables split horizon with poison reverse for all the IPv6 configured VLANs in the virtual router: enable ripng poisonreverse vlan all enable ripng splithorizon enable ripng splithorizon {vlan | tunnel | [vlan | tunnel] all} Description Enables the split horizon algorithm for RIPng. Syntax Description vlan-name tunnel-name all Specifies an IPv6 configured VLAN. Specifies an IPv6 tunnel. Specifies all interfaces. Default Enabled. Usage Guidelines Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the router from which the route was learned. Split horizon omits routes learned from a neighbor in updates sent to that neighbor. Example The following command enables the split horizon algorithm for RIPng on all IPv6 configured interfaces: enable ripng splithorizon enable ripng triggerupdates enable ripng triggerupdates {vlan | tunnel | [vlan | tunnel] all} Description Enables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a router's neighbors when the router adds or deletes routes or changes their metric. Syntax Description vlan-name Specifies an IPv6 configured VLAN. 988 | Chapter 22. RIPng Commands