Netgear XCM8810 Chassis Hardware Installation Guide - Page 114
show management, Syntax Description, Default, Usage Guidelines, Example, Description
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description This command has no arguments or variables. Default Displays the client state for all existing VLANs. Usage Guidelines None. Example The following command displays the DHCP/BOOTP status for all VLANs: show dhcp-client state Depending on your configurations, output from this command is similar to the following: Client VLAN Protocol Server Current State Default BOOTP 10.1.2.3 Received IP address configured on vlan accounting DHCP 10.2.3.4 DHCP state; Requesting Mgmt None 0.0.0.0 A total of 3 vlan(s) were displayed show management show management Description Displays the SNMP and CLI settings configured on the switch and the SNMP statistics. Syntax Description This command has no arguments or variables. Default N/A. Usage Guidelines: The following management output is displayed: • Enable/disable state for Telnet, and SNMP access • Login statistics • Enable/disable state for idle timeouts • Maximum number of CLI sessions 114 | Chapter 3. Commands for Managing the Switch