Netgear XCM8810 Chassis Hardware Installation Guide - Page 150
Syntax Description, Default, Usage Guidelines, TFTP Server Requirements, VR-Mgmt
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description host-name ip-address vr_name -g -p internal-memory local-file-internal memorycard local-file-memcard local-file remote-file Specifies the name of the remote host. Specifies the IP address of the TFTP server. Specifies the name of the virtual router. Note: User-created VRs are supported only on the platforms listed for this feature in Appendix A of the NETGEAR 8800 User Manual. Gets the specified file from the TFTP server and copies it to the local host. Puts the specified file from the local host and copies it to the TFTP server. Specifies the internal memory card. Specifies the name of the core dump file located on the internal memory card. Specifies the removable external compact flash card. Specifies the name of the file on the external compact flash card. Specifies the name of the file (configuration file, policy file) on the local host. Specifies the name of the file on the remote host. Default If you do not specify a virtual router, VR-Mgmt is used. Usage Guidelines NetASCII and mail file type formats are not supported. TFTP Server Requirements NETGEAR recommends using a TFTP server that supports blocksize negotiation (as described in RFC 2348, TFTP Blocksize Option), to enable faster file downloads and larger file downloads. If the TFTP server does not support blocksize negotiation, the file size is limited to 32 MB. Older TFTP servers that do not support blocksize negotiation have additional implementation limits that may decrease the maximum file size to only 16 MB, which may be too small to install NETGEAR 8800 images. If your TFTP server does not support blocksize negotiation, the switch displays a message similar to the following when you attempt a get (-g) or put (-p) operation: Note: The blocksize option is not supported by the remote TFTP server. Without this option, the maximum file transfer size is limted to 32MB. Some older TFTP servers may be limited to 16MB file. 150 | Chapter 3. Commands for Managing the Switch