Netgear XCM8810 Chassis Hardware Installation Guide - Page 1343
use image, partition and the selected partition for the next reboot or installation, use the following
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1343 highlights
NETGEAR 8800 Chassis Switch CLI Manual Example The following command specifies that the next reboot should use the saved configuration file named XOS1.cfg: use configuration XOS1 The following command specifies that the next reboot should use the configuration saved in the primary partition: use configuration primary use image use image {partition} {msm } Description Configures the switch to use a saved image on the next reboot. Syntax Description partition slotid Specifies which image to use on the next reboot, the one stored on the primary partition, or the one stored on the secondary partition. Specifies the MSM/MM where the package should be uninstalled. • A specifies the MSM/MM installed in slot A. • B specifies the MSM/MM installed in slot B. Default The currently booted image. Usage Guidelines This command specifies which image to use on the next reboot. Two images can be stored, one on the primary partition, one on the secondary partition. To view your current (active) partition and the selected partition for the next reboot or installation, use the following command: show switch Output from this command includes the selected and booted images and if they are in the primary or the secondary partition. Primary indicates the saved image in the primary partition; secondary indicates the saved image in the secondary partition. Example Using TFTP The following command configures the switch to use the image stored in the primary partition on the next reboot: Appendix A. Configuration and Image Commands | 1343