Netgear XCM8810 Chassis Hardware Installation Guide - Page 274
con lldp ports vendor-specific dot1 port-protocol-vlan-ID
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
NETGEAR 8800 Chassis Switch CLI Manual Syntax Description all port_list advertise no-advertise Specifies all ports on the switch. Specifies one or more ports or slots and ports. Specifies to send the information to neighbors. Specifies not to send the information to neighbors. Default No advertise. Usage Guidelines The port VLAN ID TLV allows the port to transmit the VLAN ID associated with untagged VLANs. There can be only one port VLAN ID in each LLPDU. If no untagged VLANs are configured on the specified port, the TLV is not added to the LLPDU, even if you configured this to advertise. Example The following command configures all ports to advertise port vlan ID information to neighbors: configure lldp ports all advertise vendor-specific dot1 port-vlan-ID configure lldp ports vendor-specific dot1 port-protocol-vlan-ID configure lldp ports [all | ] [advertise | no-advertise] vendor-specific dot1 port-protocol-vlan-ID {vlan [all | ]} Description Configures the LLDP port to advertise or not advertise port VLAN information to its neighbors. Syntax Description all port_list advertise no-advertise all vlan_name Specifies all ports on the switch. Specifies one or more ports or slots and ports. Specifies to send the information to neighbors. Specifies not to send the information to neighbors. Specifies all VLANs on the port. Specifies the VLAN on the port that you want to advertise. 274 | Chapter 6. Commands for Configuring LLDP