Netgear XCM8810 Chassis Hardware Installation Guide - Page 269
Commands for Configuring LLDP
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
6. Commands for Configuring LLDP 6 This chapter describes commands for doing the following: • Configuring LLDP • Managing LLDP • Displaying LLDP information For an introduction to LLDP, see the NETGEAR 8800 User Manual. configure lldp med fast-start repeat-count configure lldp med fast-start repeat-count Description The fast-start feature is automatically enabled when you enable the LLDP MED capabilities TLV. This command configures how many times, from 1 to 10, the switch sends out an LLDP MED packet with an interval of 1 second. Syntax Description count Specifies the number of times the switch transmits LLDP MED TLVs each second (once it detects a neighbor transmitting LLDP MED TLVs). The range is 1 to 10. Default 3. Usage Guidelines When the switch detects a MED-capable device, this count determines how many times the switch sends a LLDP MED TLVs with an interval of 1 second. The fast-start feature enables the MED-capable device to quickly learn information; this command changes the value from the default 3. The fast-start feature is automatically enabled when you enable the LLDP MED capabilities TLV. Chapter 6. Commands for Configuring LLDP | 269