Netgear XCM8810 Chassis Hardware Installation Guide - Page 820
con bootprelay dhcp-agent information remote-id
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 820 highlights
NETGEAR 8800 Chassis Switch CLI Manual replace Specifies to replace the existing data with the switch's own data. Default Replace. Usage Guidelines Use this command to set a policy for the relay agent. Packets can be dropped, the option 82 information can be replaced (the default), or the packet can be forwarded with the information unchanged. Example The following command configures the DHCP relay agent option 82 policy to keep: configure bootprelay dhcp-agent information policy keep configure bootprelay dhcp-agent information remote-id configure bootprelay dhcp-agent information remote-id [ | system-name] {vr } Description Configures the remote ID sub-option that identifies the relaying switch for DHCP requests and replies. Syntax Description remote_id system-name vrid Specifies a text string that becomes the remote ID sub-option for the switch. Specify a text string composed of 1 to 32 characters. Specifies that the switch name is used as the remote ID sub-option for the switch. Specifies the VR on which to configure the remote ID sub-option. Default The switch MAC address. Usage Guidelines To display the remote-ID, use the following command: show bootprelay 820 | Chapter 19. IP Unicast Commands