Netgear XCM8810 Chassis Hardware Installation Guide - Page 495

NETGEAR 8800 Chassis Switch CLI Manual To delete an application from a zone, use the syntax: configure access-list zone delete application Example The following command adds the CLI application to the zone myzone at a priority of 6: configure access-list zone myzone add cli application-priority 6 configure flow-redirect add nexthop configure flow-redirect add nexthop priority Description Adds a nexthop for the named flow redirection policy. Syntax Description flow-redirect-name ipaddress number Specifies the name of the flow redirection policy. Specifies the IP address of a new nexthop Specifies the priority value for the nexthop. Default N/A. Usage Guidelines Use this command to add a new nexthop for the named flow redirection policy with a priority value. The priority value can range from a low of "1" to a high of "254." The nexthop with the highest priority among multiple ones is preferred as the working nexthop. When each added nexthop has the same priority, the first one configured is preferred. Example The following command adds a nexthop 10.1.1.1 for the flow redirection policy flow10 with a priority of 100: configure flow-redirect flow10 add nexthop 10.1.1.1 priority 100. configure flow-redirect delete nexthop configure flow-redirect delete nexthop Description Deletes a nexthop for the named flow redirection policy. Chapter 13. ACL Commands | 495