Netgear XCM8810 Chassis Hardware Installation Guide - Page 1084
con bgp delete network, con bgp export shutdown-priority
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1084 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure bgp delete confederation-peer sub-AS-number 6553700 The following command deletes a sub-AS from a confederation using the ASDOT 4-byte AS number format: configure bgp delete confederation-peer sub-AS-number 100.100 configure bgp delete network configure bgp delete network {address-family [ipv4-unicast | ipv4-multicast]} [all | ] Description Deletes a network to be originated from this router. Syntax Description address-family all ipaddress The address family to which the network routes are exported. BGP supports two address families: IPv4 Unicast and IPv4 Multicast. Specifies all networks. Specifies an IP network address and a netmask length. Default If no address family is specified, IPv4 unicast is the default. Usage Guidelines None. Example The following command deletes a network to be originated from this router: configure bgp delete network 192.1.1.12/30 configure bgp export shutdown-priority configure bgp export [direct | isis | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | rip | static {address-family [{ipv4-unicast |ipv4-multicast]} shutdown-priority Description Configures the shutdown priority for IGP export. Syntax Description direct Specifies direct routing. 1084 | Chapter 25. BGP Commands