Netgear XCM8810 Chassis Hardware Installation Guide - Page 1010
con ospf metric-table, con ospf priority
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1010 highlights
NETGEAR 8800 Chassis Switch CLI Manual Default The default setting is 30 seconds. Usage Guidelines The range is between 0 (disabled) and 600 seconds, using multiples of 5 seconds. The LSAs added to the LSDB during the interval are batched together for refresh or timeout. Example The following command configures the OSPF LSA batch interval to a value of 100 seconds: configure ospf lsa-batch-interval 100 configure ospf metric-table configure ospf metric-table 10M 100M 1G {10G } Description Configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces, and optionally, the 10 Gbps interface. Syntax Description cost Specifies the interface cost for the indicated interfaces. Default • 10 Mbps-The default cost is 10. • 100 Mbps-The default cost is 5. • 1 Gbps-The default cost is 4. • 10 Gbps-The default cost is 2. Usage Guidelines None. Example The following command configures the automatic interface costs for 10 Mbps, 100 Mbps, and 1 Gbps interfaces: configure ospf metric-table 10m 20 100m 10 1g 2 configure ospf priority configure ospf [area | vlan [ | all]] priority 1010 | Chapter 23. OSPF Commands