Netgear XCM8810 Chassis Hardware Installation Guide - Page 591

NETGEAR 8800 Chassis Switch CLI Manual secondary string Configures the authentication string for the secondary TACACS+ accounting server. The string to be used for authentication. Default N/A. Usage Guidelines Secret needs to be the same as on the TACACS+ server. The encrypted keyword is primarily for the output of the show configuration command, so the shared secret is not revealed in the command output. Do not use it to set the shared secret. Example The following command configures the shared secret as "tacacsaccount" on the primary TACACS+ accounting server: configure tacacs-accounting primary shared-secret tacacsaccount configure tacacs-accounting timeout configure tacacs-accounting timeout Description Configures the timeout interval for TACACS+ accounting authentication requests. Syntax Description seconds Specifies the number of seconds for accounting requests. Range is 3 to 120 seconds Default The default is 3 seconds. Usage Guidelines This command configures the timeout interval for TACACS+ accounting authentication requests. To detect and recover from a TACACS+ accounting server failure when the timeout has expired, the switch makes one authentication attempt before trying the next designated TACACS+ accounting server or reverting to the local database for authentication. In the event that the switch still has IP connectivity to the TACACS+ accounting server, but a TCP Chapter 15. Security Commands | 591