Netgear XCM8810 Chassis Hardware Installation Guide - Page 983
disable ripng splithorizon, disable ripng triggerupdate
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 983 highlights
NETGEAR 8800 Chassis Switch CLI Manual Usage Guidelines Like split horizon, poison reverse is a scheme for eliminating the possibility of loops in the routed topology. In this case, a router advertises a route over the same interface that supplied the route, but the route uses a hop count of 16, defining it as unreachable. Example The following command disables the split horizon with poison reverse algorithm for RIPng: disable ripng poisonreverse disable ripng splithorizon disable ripng splithorizon {vlan | tunnel | [vlan | tunnel] all} Description Disables the split horizon algorithm for RIPng. Syntax Description vlan-name tunnel-name all Specifies an IPv6 configured VLAN. Specifies an IPv6 tunnel. Specifies all interfaces. Default Enabled. Usage Guidelines Split horizon is a scheme for avoiding problems caused by including routes in updates sent to the router from which the route was learned. Split horizon omits routes learned from a neighbor in updates sent to that neighbor. Example The following command disables the split horizon algorithm for RIPng: disable rip splithorizon disable ripng triggerupdate disable ripng triggerupdate {vlan | tunnel | [vlan | tunnel] all} Description Disables the trigger update mechanism. Triggered updates are a mechanism for immediately notifying a router's neighbors when the router adds or deletes routes or changes their metric. Chapter 22. RIPng Commands | 983