Netgear XCM8810 Chassis Hardware Installation Guide - Page 97
create snmp trap, disable dhcp vlan
View all Netgear XCM8810 Chassis manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
NETGEAR 8800 Chassis Switch CLI Manual configure telnet vr all create snmp trap create snmp trap severity event Description Creates and sends an SNMP trap containing the information defined in the command. Syntax Description severity EventName msg Specifies one of the eight severity levels defined in the NETGEAR 8800 software. Enter one of the following values: critical, error, warning, notice, info, debug-summary, debug-verbose, debug-data. Specifies the event name. Enter a name using alphanumeric characters. Specifies a message. Enter the message using alphanumeric characters. Default N/A. Usage Guidelines None. Example The following example sends a trap of severity info for event AAA with the message user XYZ logged in: create snmp trap severity info event AAA "user XYZ logged in" disable dhcp vlan disable dhcp vlan [ | all] Description Disables the generation and processing of DHCP packets on a VLAN to obtain an IP address for the VLAN from a DHCP server. Syntax Description vlan_name all Specifies a VLAN name. Specifies all VLANs Chapter 3. Commands for Managing the Switch | 97